Debug: Database connection successful
You are not logged in.
I ran into a few articles today:
Not Thermal Battery:
https://www.youtube.com/watch?v=QU16iUYKPr4
Quote:
Texas Oil Wells Hold a Renewable Energy Solution | American Innovators
Thermal Battery:
https://www.goodnewsnetwork.org/scienti … y-storage/
Quote:
Researchers Successfully Turn Abandoned Oil Well into Giant Geothermal Battery
Thermal Battery:
https://e360.yale.edu/features/kern-cou … gy-storage
Quote:
Can a California Oilfield Be Retrofitted to Store Solar Energy?
The transition to renewables requires batteries that can store energy for long periods of time. To meet that demand, engineers in California’s Kern County are aiming to revamp depleted oil wells to hold concentrated solar energy in super-heated water underground.By Stephen Robert Miller • May 23, 2024
Done
Last edited by Void (2024-08-27 10:36:21)
Be careful what you wish for.
Offline
Like button can go here
https://www.msn.com/en-us/money/technol … r-AA1rymdX
Quote:
Company announces achievements in development of seemingly unlimited underground power source: 'The most productive enhanced geothermal system in history'
Story by Jeremiah Budin • 12h • 2 min read
Geothermal could be of use on Mars as well.
Ending Pending ![]()
Last edited by Void (2024-10-02 06:51:24)
Be careful what you wish for.
Offline
Like button can go here
Sage Geothermal looks interesting: https://www.sagegeosystems.com/
https://www.bing.com/videos/riverview/r … ORM=WRVORC Quote:
New Generation Geothermal: The Future of Energy with Sage Geosystems’ Cindy Taff
YouTube
Forging the Future with Chris Howard
5 days ago
Their methods are a bit different. They apparently inflate a well like a lung, usually cycling about 20% of the liquid with each inflation/deflation.
-They say that for the actual geothermal they can put heat in, and expect then to get out 2 times as much energy.
-They also seem to have a method to tap the water flow itself at a 70% round trip efficiency.
So, then seem to intend to store solar and wind energy. But they are not necessarily only about thermal storage, but as I have said they seem to indicate that they can also get actual geothermal energy out as well.
Ending Pending ![]()
Last edited by Void (2024-12-10 09:14:52)
Be careful what you wish for.
Offline
Like button can go here
Here is another claim: https://www.msn.com/en-us/money/other/i … b6e2627&ei
Quote:
t’s Fracking Marvelous: Geothermal Set To Become Miracle New Energy Source
Story by Douglas McIntyre • 3d • 2 min read
So, I know that there are haters here for alternative energy. But I anticipate improvements if function of Solar, Wind, and Batteries. And geothermal might be able to substitute for Natural Gas Peaker plants I think.
I don't have much problem with responsible nuclear, but politics are real. Some things just can't happen because powerful entities will not let them happen.
Ending Pending ![]()
Last edited by Void (2024-12-21 11:06:59)
Be careful what you wish for.
Offline
Like button can go here
This is rather nice in being detailed more than any other related article I have seen: https://www.bing.com/videos/riverview/r … RM=VRDGARs Quote:
Geothermal Energy is Changing
YouTube
Real Engineering
22.3K views
1 hour ago
It is about Quaise Energy, with a special drilling method. It does not seem overly optimistic or pessimistic, so then explains to some degree the extent of the problems of the task.
So, I think it is worth watching the video.
Ending Pending ![]()
Last edited by Void (2025-03-01 11:44:47)
Be careful what you wish for.
Offline
Like button can go here
This is encouraging: https://www.youtube.com/watch?v=dOIlMdIqXbQ
Quote:
I Was Wrong About Geothermal Energy.
Sabine Hossenfelder
Just for fun, I have been thinking about geothermal on Saturn's moon Titan.
It turns out that there may be a crust of Methane Clathrates that may insulate the underlying materials.
https://www.space.com/saturn-titan-methane-ice-life
Quote:
Scientists have discovered that the icy shell of Saturn's largest moon, Titan, could possess an insulated, six-mile-thick (9.7-kilometer-thick) layer of methane ice beneath its surface. Ironically, this layer may make signs of life from the subsurface ocean of Titan easier to detect. And, down the line, the discovery could benefit the fight against human-driven climate change on Earth.
So, drilling below that might yield a "Warmer" layer. If a hydrocarbon or other gas could be used, then perhaps a large energy source would be available. This might greatly improve the habitability of Titan by humans and robots.
If the dunes of Titan are actually comet dust, then the building materials desired would be common on Titan as well. The materials probably needed in order to do geothermal on Titan, I presume.
https://phys.org/news/2024-04-titan-dunes-comet.html
Quote:
April 18, 2024
Editors' notes
Are Titan's dunes made of comet dust?
by Allen Versfeld, Universe Today
Ending Pending ![]()
Last edited by Void (2025-03-02 12:24:23)
Be careful what you wish for.
Offline
Like button can go here
I think this is of interest, as it contains some specs to observe to understand what it can do, apparently.
https://interestingengineering.com/ener … mal-energy
Quote:
Swiss firm develops autonomous drill machine to tap shallow geothermal energy
Developed by the Zurich-based startup Borobotics and nicknamed ‘Grabowski’, the drill measures only 5.3 inches in diameter and 9 feet in length.Updated: Jan 19, 2025 07:39 AM EST
Photo of the Author Christopher McFadden
Christopher McFadden
Quote:
However, despite its clear advantages, the drill is not without drawbacks. The first and most critical is that it tends to be slower than conventional drills. Additionally, it can only drill up to a maximum depth of 1,640 feet (500 meters).
This has both an Earth and Mars interest, I think.
For Earth, it is my feeling that if you decentralize power, that advantages the kind of culture I prefer. Solar is potentially decentralized, and this looks like it could be as well. If used with a heat pump, then in the summer, as you cool your house, you lay up neat for the winter, and in the winter, of course you lay up cooling for the summer.
I think that in generally for the "American Ways", (Maybe other similar countries as well, maybe Canada), we want a certain amount of individuality and a certain amount of hiving, or collective process. Of course by collective I am not talking commies, rather large utilities. But that is the point, commies and fascists, adore collective centralization as then they can threaten to cut off utilities, or slowly drain the wealth from individuals to support inefficiency at the central controls.
For Mars, it appears that the weight of the drill system may be compatible with shipping them from Earth and getting a desired result on Mars. It is a potential way to turn "Dumb Rock" into machinery, with a minimum of consumption of high-quality processed materials.
From a Solar point of view, you could draw "Dumb Heat" from the sun, using a heat pump, as long as the sun caused solar panels to generate electricity. The electricity and heat are almost simultaneous.
So the best heat pump I am aware of from Norway can get up to 180 degrees C, which on Mars could be valuable indeed: https://www.pv-magazine.com/2021/08/19/ … heat-pump/
Quote:
The world’s hottest heat pump
A Norwegian consortium has built an industrial heat pump that can reach a temperature of up to 180 degrees Celsius. The machine can be used with different industrial processes that rely on steam as an energy carrier and can reduce a facility’s energy consumption by between 40% and 70%, as it enables the recovery of low-temperature waste heat.August 19, 2021 Emiliano Bellini
Those temperatures are considered good enough for some industrial processes, and some heat storage in rocks, near that temperature would likely be a welcome emergency source of heat during problem events, even perhaps Global Dust Storms, or high latitude winters.
And perhaps a similar system could be able to store cold. Mars is very generous with cold.
A hot and a cold unit each potentially could generate power.
Eavors system might be adapted to this situation, I think: https://www.eralberta.ca/story/first-of … oad-power/ Quote:
Eavor Technologies Inc. has developed the world’s first closed-loop geothermal system. In a demonstration project near Rocky Mountain House, Alberta, the Eavor-Lite facility uses existing oil and gas drilling technology and expertise to facilitate the development of an innovative energy supply.
The technology—dubbed the Eavor-Loop™—circulates a proprietary fluid that collects heat from below the earth’s surface in a multi-kilometre loop. Demonstration at this scale will provide the validation needed to de-risk identified commercial opportunities in Canada and around the world.
So, an adaptation of their technology along with the Swiss drill, might be able to be created on Mars, where the things Mars has to offer can become an advantage.
1) Lots of rock.
2) Fluctuating temperatures/Solar Energy.
And if you had nuclear, power similar applies, as you would have backup energy if the nuclear plant needed maintenance/repairs.
But even if you had nuclear, and no solar electric these drilled networks could make a good radiator system/ Storage of heat. And you could still pull heat out of simple thermal solar panels, perhaps using a heat pump method.
Ending Pending ![]()
Last edited by Void (2025-05-01 11:39:17)
Be careful what you wish for.
Offline
Like button can go here
This post is dependent on the just prior post as it is for the Moon, where the prior was for Earth and Mars.
The drill system would likely have to be revised to use CO2 as the working fluid instead of water. If that is possible then for the Moon, there could be some promise.
The Moon is rock with extreme temperature variation as common to much of the surface.
I expect that under the loose regolith, the rock may be less fractured. It would be needed to have a method to plug the fractures that may exist.
As for CO2 on the Moon, I have suggested various methods to make it more economical to have and use on the Moon.
Here are some suggestions in another topic: https://newmars.com/forums/viewtopic.ph … 18#p231318 https://newmars.com/forums/viewtopic.ph … 55#p231355
Some of the earlier posts in that topic may have more materials.
Anyway, as I see it, Carbon for the Moon has two concerns: 1) How much does it cost to get it to the Moon? 2) What is it worth on the Moon?
If the worth of Carbon is high, then it may be worth getting from Earth to the Moon or from another source to the Moon.
Looking at the Equator of the Moon as an example, it should be possible to get very high heat into CO2 to store in a rock reservoir drilled by the device shown in the prior post.
As for the cooling side, the Moon offers lots of resources to make heat exchangers with. Using a sun shade cold should be possible even in the day, and of course the night will offer very deep cold.
So, then you might be able to create a "Battery" that can generate electricity 24/7. In great part made of rock.
Ending Pending ![]()
Of course, some day Mercury. Mercury already has lots of Carbon on it's surface.
Ending Pending ![]()
Last edited by Void (2025-05-01 12:08:32)
Be careful what you wish for.
Offline
Like button can go here
Well, we may know within a few years about this one: https://www.bing.com/videos/riverview/r … &FORM=VIRE Quote:
How Fusion Tech Just Changed Geothermal Energy Forever
YouTube
Undecided with Matt Ferrell
107.5K views
Time will tell.
Ending Pending ![]()
You never know, maybe it could have use on Mars or Titan.
Some notions have it that the crust of Titan may to some degree consist of thermally insulating Clathrate of Methane and Water.
If so, then deeper down the heat could be significant. I would start with a notion of Methane as a working fluid. But it is a maybe.
However, a Titan with a large amount of geothermal energy and a thick atmosphere has to be attractive even without fusion power.
Ending Pending ![]()
Last edited by Void (2025-07-22 16:15:49)
Be careful what you wish for.
Offline
Like button can go here
The title is wrong, but the subject material is very interesting, I feel: https://www.youtube.com/watch?v=FxWsJgdo8HU
Quote:
West Virginia RELEASED 1 Million Arctic Char Into A Flooded Mine—What Happened Next Defies All Logic
EXTREME AGRICULTURE
So a Geothermal Thermal Battery might be drilled to do similar to the above.
You could use the water to both raise fish and cool Data Centers.
And you could use buildings as radiators. You could also draw Industrial heat from the water at some point to cool the water.
Something like this might be done in Mars lava tubes, is you could fill them with water.
The method that Nitrogen and CO2 got concentrated into the mine water might explain where much of the atmosphere went. It may be in the deep aquifers that are thought to exist in the Martian crust.
Perhaps industrial Ammonia could be harvested from this process as well.
Ending Pending ![]()
Last edited by Void (2026-01-22 09:54:05)
Be careful what you wish for.
Offline
Like button can go here
Referring to the prior post, it seems that there can be a case for "Cold" geothermal.
Either with Eavor or Fracking Methods.
https://www.bing.com/search?q=Evor+Geot … pc=EDGEXST
So, in a weird way, places that are not great for deep hot geothermal, might be good for shallow cold geothermal.
Probably high latitudes with no permafrost might do.
A temperature from 52 to 58 degrees F may be the target. That would not be the natural rock temperature, but what it might settle to, if you have various inputs and outputs of cold and heat.
An interesting game would be to have a northern lake where you have robots that harvest ice and then perhaps melt it using Data Server heat, and then push the Melt Water though a geothermal well. Then that could would be available for the summer as well perhaps.
Mixing ice water with Data Center waste heat, you could achieve the 52 to 58 degrees F water for that fish farming.
Harvesting ice off of a lake would increase evaporation a little bit but I don't think it would dry up a lake for instance.
Ending Pending ![]()
Last edited by Void (2026-01-22 12:25:08)
Be careful what you wish for.
Offline
Like button can go here
Void,
Supercritical CO2 undergoes such extreme density changes based upon temperature that pumping it down a well creates a thermosiphon effect, such that additional pumping power is not needed, unlike water or steam. It's actually more efficient than water / steam, even at low temperatures, again, because no pumping power is required. They're experimenting with that in frack wells here in Texas at temperatures as low as 150C. The top side equipment remains very small because the turbine is still much smaller than a steam turbine.
For an ordinary frack well that goes down 5,000 to 15,000ft Total Vertical Depth (TVD), a 3MWe turbine, gearbox, printed circuit heat exchanger, and electric generator still occupies less "pad space" than the equipment normally used to produce oil or gas from the well. We literally have hundreds of thousands of these small wells, so if they were ever suitable for fracking to begin with, then they're also suitable candidates for SCO2 geothermal conversion. It's a closed-loop system that generates electric power and does not appear to lose much power or CO2 over time. SCO2 doesn't leach salt from the layer cake rock formations containing various salts, unlike water / steam. That's part of why it's stable over time, and incurs less damage to the turbine and heat exchanger equipment from corrosion. Since the operating temperatures are so low, and pressures as well, plain Carbon steels or Austempered Ductile Iron can be used. That means the equipment can be much cheaper than high temperature units because you don't need big chunks of Inconel.
Traditional geothermal systems attempt to find some ideal formation for generating power from steam, and tend to be very large, time-consuming to construct, and thus costly. These new SCO2 systems are so small that the entire equipment skid easily fits on the bed of a "short trailer". One standard length trailer has enough physical space and carrying capacity to take the equipment skid and a small crane to the well head to emplace the power generation unit. You will obviously need more trucks to carry step-up / step-down transformers, power cables, and poles, but that's about it. It's like a mini reactor, but without the security requirements.
Texas has 439,000 wells, give or take a few. Let's say only 100,000 are suitable for generating electric power. That's 300GWe worth of firm power- the only kind acceptable for data centers and manufacturing. Texas total electric generating capacity in summer (Texas has lots of wind and solar) is only 168GW from all sources (natural gas, coal, oil, wind, solar, nuclear, etc). 300GWe would be a very nice capacity addition for AI data centers and manufacturing plants. We could pay the well operators a fee to maintain their abandoned wells so they continue generating electricity after out-living their usefulness for oil / gas production. At 600t per 3MWe onshore wind turbine vs 6t for a 3MWe SCO2 gas turbine, the metal-to-metal efficiency ratio is 100:1 in favor of the SCO2 gas turbine.
Maybe we'd finally have enough excess mid-day grid capacity to think about charging EVs at work. If we can devote 70GW to cars for 2 hours per day, that's enough juice for 10M cars to drive about 56 miles per day. There are about 22M total registered vehicles of all types in the Texas. Mid-day charging using opportunistic power is the only kind that works because it's the only kind that doesn't involve running natural gas turbines at night, which defeats the stated purpose behind using EVs when that's how they're otherwise going to be recharged.
Offline
Like button can go here
https://www.youtube.com/watch?v=fIYRh8MlFC0
Quote:
America Found Something Better Than Oil Underground
AIAtlashade and ForgedOrigins
I have to wonder if soon we will have Geothermal, Solar 40%+, Wind that is practical, Nuclear Fission, Nuclear Fusion, Natural Hydrogen, And power beamed from orbit.
The arrogant Eloy in Europe and Canada will have destroyed the Industrial people as they demand that they should rule without having merit.
(Not all of the people just the idiots running things in those places now).
The Americas (Perhaps - Canada) prosperous from the Canadian border to the tip of South America.
I am thinking that it is possible.
As for Carbon in the Atmosphere, artificial wood from grass and Bamboo could pull it out of the atmosphere, and we can make structure for these new industries such as supports for solar panels from it.
My point is you don't kill your old industrial horse and then hope to get a new one. You use all your horses and achieve a clean atmosphere faster.
Ending Pending ![]()
Last edited by Void (2026-09-16 21:02:27)
Be careful what you wish for.
Offline
Like button can go here
So, someone has indeed found a way to combine geothermal with Geothermal Battery.
https://www.bing.com/videos/riverview/r … &FORM=VIRE Quote:
America’s New Geothermal Breakthrough Just Shocked The Entire Energy Industry!
YouTube
Proof of Concrete
It is not quite how I imagined it. During peak power of solar or wind, they can compress return water (Cold Side), into the well, and compress the fluids inside. Then when peak consumption comes they can release more steam to turbines.
The current technology is suitable for the American West, but if drilling deeper can be achieved with gyrotrons, then wells could be anyway, they say.
Imagine a well in Alaska, where the waste heat could be released into a greenhouse that has solar panel properties.
Ending
Last edited by Void (2026-10-18 07:30:44)
Be careful what you wish for.
Offline
Like button can go here
A thing that becomes apparent is that intentions toward old coal power plants as per some types of geothermal may run parallel to intuitions about Iron/Air batteries for the similar:
https://www.bing.com/videos/riverview/r … e564a9973d
Quote:
Utube, America Just Unleashed a Battery Breakthrough Nobody Saw Coming!
27:57America Just Unleashed a Battery Breakthrough Nobody Saw Coming!
YouTube
ALISKA
71 views
The point is that geothermal has some surge capacity, and if you also added banks of Iron/Air batteries, you might greatly enhance to power grids.
It is good to make note of successes and not only negative things.
Ending
Last edited by Void (2026-11-07 08:41:54)
Be careful what you wish for.
Offline
Like button can go here
Piggy Backing on the previous post, about Old Coal Power Plants, Geothermal, and Iron/Air Batteries, I have seen a article about a phase change thermal storage device from Australia as their invention.
https://www.bing.com/videos/riverview/r … &FORM=VIRE Quote:
Australia Built Energy-Storing Blocks — And They Could Change Everything
YouTube
Aussie Post
It occurs to me that if you connect in serial Geothermal>>>>Phase Change Blocks, and use in parallel Iron/Air battery storage, the combination of the three at an old coal power plant may be a good investment.
In that case you do not need quite as hot a geothermal well. If you have the heaters to heat up the Phase Change Blocks, then when they are fully heated you can dump heat down the geothermal well.
So, then you don't need quite as hot a geothermal well to get supercritical steam, as long as the Phase Change Blocks are hot.
Then also you would have the Iron/Air Batteries to serve to backup energy gaps.
So, then "Pretty Good" but not Super Hot wells would have value. The storage system might be compatible with solar and wind energy, and grid demand variations.
Ending
Last edited by Void (2026-11-07 10:38:46)
Be careful what you wish for.
Offline
Like button can go here
Void, that is interesting. This video discusses development of a metallic brick to be used in a high temperature thermal energy storage. This application is intended to serve as both: (1) An end-use energy storage system, for users of high industrial heat; and (2) A thermal storage storage system intended to generate electricity to supply to the grid.
What is new in this case is the material that stores the heat. It appears to be a mechanical alloy of two metals. When heated, both metals absorb sensible heat until the melting point of one of the metals is reached. At that point, one of the metals melts, absorbing latent heat during phase change, but the higher melting point metal holds it in the brick using pore pressure. So the whole brick remains solid. There are pros and cons to this material compared to other other options:
Pros:
(1) The inclusion of latent heat allows the material to discharge heat at a constant temperature. That has some very real advantages. If using it for power recovery, it allows heat exchangers to operate at a constant thermal gradient and turbines to be optimised for a specific pressure ratio. End use heat is typically required at a specific temperature. So having a heat store that maintains constant temperature is helpful.
(2) The blocks are their own container. Other latent heat (phase change) heat storage materials require a container for the molten liquid. Molten salts are the most obvious competitor for this application. There are problems building containers and heat exchangers for molten salts that are capable of standing up to the corrosive conditions for decades. In this case, we can use a steel vessel and blow an inert gas through the bricks to recover heat. That is much easier than making a container out of stainless steel or some nickel alloy, which has to contain the salt under hydrostatic pressure.
(3) The blocks are metal and therefore have high thermal conductivity. This is important because the material is solid. As heat is extracted from the outer layers of a solid thermal storage material a thermal gradient develops within it. This means that the delivery temperature of the heat will tend to decline as more is extracted, even if there is phase change material within the brick. The high thermal conductivity of the metal bricks will minimise this effect.
(4) The bricks are made from ductile metals. Cheaper solid materials like stone and concrete are ceramics. These are likely to crack as they undergo thermal cycles, because thermal gradients introduce differences in thermal expansion between surface layers and deeper layers. Metal bricks will be less vulnerable to this type of degradation.
(5) The blocks have an estimated lifespan of 30 years and are recyclable. Whilst that doesn't make a lot of difference in the short term to per unit energy costs, it does make a big difference to the sustainability of the system. If a government were to sink money into a system, they would prefer this kind of guarantee.
Cons:
(1) The bricks are made from refined metals. This implies considerable invested energy and sunk cost. It isn't possible given the information we have to determine whether this additional cost (over cheaper options, like stone or salt) will be justified by improved performance. The cost of the bricks isn't stated in the video (did I miss it?), so we cannot really compare it to other systems like molten salt.
(2) It isn't clear what the volumetric heat capacity of the bricks is. So it is hard to compare them to other options like molten salts or sensible heat storage options like stone. However, it is noteworthy that only a part of the structure of the bricks melts. So only part will contribute to latent heat storage.
(3) Most metals are denser than most ceramics. A pile of metallic bricks will exert considerable load on a foundation. This will need to be designed to withstand the load, minimise heat loss whilst also remaining intact for at least the lifetime of the bricks ~30 years. This is not a trivial problem.
(4) For electricity recovery, in common with other TES systems, efficiency will be lower than a battery. Heating the blocks using electric power will be close to 100% efficient. But the efficiency of electricity recovery will be at most 50% efficient. And achieving 50% implies using S-CO2 turbo machinery, whose cost will not be trivial. This means that the cost of this system woukd likely add considerably to the cost of electricity on the grid. The system may achieve better economics if we use it as part of a town heating system. The 50% of heat that would otherwise be lost can then be captured and put to use.
(5) High temperature TES can only be used as a long-term energy store (days - weeks) if systems are large. This is because the temperature difference between the blocks and the ambient environment is high - hundreds °C. Insulation must be used to reduce heat losses, but beneath a certain size the required volume of insulation will be an excessive part of the system. High temperature TES will be most useful for large heat users or large electricity generators. This works less well in small systems.
TES is one of the few options for long-duration energy storage. These blocks appear to hold promise. But we will need more information to be able to weight them against competing technologies.
Last edited by Calliban (2026-11-10 09:09:56)
"Plan and prepare for every possibility, and you will never act. It is nobler to have courage as we stumble into half the things we fear than to analyse every possible obstacle and begin nothing. Great things are achieved by embracing great dangers."
Offline
Like button can go here
You may not be done with your post, sorry if so.
Yes, as I see it, a combination of those bricks and a somewhat low grade geothermal well, might have merit.
The lower grade a geothermal well is the more useful it might be to inject heat into it, if you have intermittent power that will otherwise be wasted. But I well is not as likely to be heat able to very high temperature. So, if you had a serial installation, you might use the two together. Even if you are pushing heat down a geothermal well, the passage down can serve as storage for heat, but the location deepest may still be contributing some geothermal heat. And then the output not being quite high enough, perhaps the bricks could boost it up a few hundred degrees.
We hope that Quaise may be able to drill super deep wells so that geothermal may be workable almost anywhere. But it may be that cheaper wells not quite as deep with the bricks might be economic ways to work with intermittent energy such as solar, wind, tidal, etc.
Ending
Be careful what you wish for.
Offline
Like button can go here
I looked into ground storage of heat for my parent's house. My thoughts were to use home made solar thermal panels to gather heat at 20 - 80°C during summer. This would be injected into a borehole. The borehole can then supply heat at 15 - 20°C to a heat pump during winter and spring.
I ran some thermal calculations. The concept would have worked. But the upfront costs of digging the borehole and installing the heat pump were high - tens of thousands of pounds overall. My father didn't think it worth the investment, given he only had a decade of life expectancy left. My parents use a wood burning stove for most of their space and water heating. That works fine, so long as you have a plentiful supply of wood and the time to cut it and store it. My father is in poorer health now and that is becoming harder for him. I think eventually, they will install an air source heat pump. Gas isn't an option for them, as they live out in the sticks. LPG and oil are possible, though expensive.
Last edited by Calliban (2026-11-10 11:06:48)
"Plan and prepare for every possibility, and you will never act. It is nobler to have courage as we stumble into half the things we fear than to analyse every possible obstacle and begin nothing. Great things are achieved by embracing great dangers."
Offline
Like button can go here
Well, a nice development involving Canadians in large part.
It would be nice if they would stop trying to shame Americans and in particular Texans.
Also they tell a falsehood about earthquake induction from fracking. It does not work that way. Actually, earthquakes do not get induced from fracking. Rather produced brine injection where it finds an existing fault is the problem.
In geothermal drilling there should be not produced brine. Produced brine emerges from wells that are from oil production. So, fracking for geothermal is not likely to produce earthquakes.
Having corrected those things then I do think this video is good news, and Canadians are doing a good thing. Too bad the toot their horn so much.
https://www.bing.com/videos/riverview/r … 76fbc45e51 Quote:
Utube, Knightly Talk, Canadian Engineers Replaced Diamond Drill Bits With 6000 degree C Plasma == Texas Oil Giants Were Not Ready, 54m ago
32:59Canadian Engineers Replaced Diamond Drill Bits With 6,000°C Plasma — Texas Oil Giants Were Not Ready
YouTube
Knightley Talk
16 views
Quote:
Copilot Search Branding
Like
Dislike
Canadian Engineers’ 6,000°C Plasma Drilling Innovation vs. Texas Oil Industry
Canadian engineers have developed a high‑temperature plasma drilling method that replaces traditional diamond drill bits, aiming to solve deep‑well heat and wear problems — a technology Texas oil giants reportedly were not ready to adopt.What the innovation is
According to the YouTube video, Canadian engineers substituted conventional diamond‑encrusted drill bits with a plasma‑based drilling system capable of withstanding temperatures up to 6,000°C
YouTube
YouTube
. This approach is designed for shale wells in the Texas Permian Basin, where drilling can lose up to 75% of the bit’s life due to extreme heat, friction, and rock abrasion
YouTube
YouTube
.The plasma system likely uses ionized gas at extreme temperatures to cut and abrade rock, potentially reducing wear and allowing deeper, faster drilling without the frequent bit changes that plague diamond bits. Diamond drilling traditionally uses industrial diamonds set in a metal matrix, which wear over time and require replacement
Wikipedia
Wikipedia
.Why it matters for Texas oil
The Permian Basin is one of the world’s most productive oil and gas regions, but heat management is a major constraint in ultra‑deep wells. Conventional diamond bits can fail quickly under these conditions, increasing costs and downtime. A plasma‑based system could:Extend bit life by avoiding the thermal degradation that limits diamond bits.
Increase drilling speed by cutting through harder formations more efficiently.
Reduce operational costs by lowering bit replacement frequency and downtime.
Industry readiness gap
The video notes that Texas oil companies were “not ready” for this technology, suggesting a gap in infrastructure, operational protocols, or cost‑benefit models
YouTube
YouTube
. This could be due to:Capital investment needs for new drilling equipment.
Lack of proven field data in the Permian’s specific geology.
Operational culture tied to established drilling practices.
Broader context
While the plasma drilling concept is promising, it’s still in the development/demonstration phase and may face challenges in scaling, safety, and environmental impact. Other companies, like Mazama Energy, are exploring alternative cooling and drilling technologies (e.g., CO₂‑based “Carbon Chill”) to address heat and depth limits in geothermal drilling
TechCrunch
TechCrunch
, showing that heat management is a cross‑industry challenge.In short: The Canadian plasma drilling method is a potential game‑changer for deep‑well drilling, but adoption in Texas’s oil sector is hindered by technical, economic, and operational barriers. The YouTube video frames it as a case where innovation outpaces industry readiness
YouTube
YouTube
The British Elite method of technology has some merit, but please find better manors. You are supposed to be the superior people, aren't you?
But good work!
Ending
Last edited by Void (2026-11-16 09:59:59)
Be careful what you wish for.
Offline
Like button can go here