New Mars Forums

Official discussion forum of The Mars Society and MarsNews.com

You are not logged in.

Announcement

Announcement: As a reader of NewMars forum, we have opportunities for you to assist with technical discussions in several initiatives underway. NewMars needs volunteers with appropriate education, skills, talent, motivation and generosity of spirit as a highly valued member. Write to newmarsmember * gmail.com to tell us about your ability's to help contribute to NewMars and become a registered member.

#326 2022-09-21 12:04:01

Mars_B4_Moon
Member
Registered: 2006-03-23
Posts: 8,892

Re: 3D Printers

Astronauts could use Mars soil for 3D-printing on the Red Planet - Making things for Mars astronauts on-planet would be a boon for future human missions.

https://www.space.com/martian-soil-manu … ssion-boon

First-of-its-kind 3D-printed home blends concrete, wood | Cornell Chronicle

https://news.cornell.edu/stories/2022/0 … crete-wood

Their first-of-its-kind hybrid design connects structural elements composed of 3D-printed concrete with conventional wood framing representative of most U.S. residential construction. The combination shows how each material can be used where it works best, with minimal waste, to create buildings that are efficient, resilient against increasingly intense weather events and potentially more affordable.

Offline

#327 2022-09-23 10:54:16

Mars_B4_Moon
Member
Registered: 2006-03-23
Posts: 8,892

Re: 3D Printers

HP Targets Production-Scale Metal 3D Printing
https://www.digitalengineering247.com/a … d-printing

First 3D-Printed Tram Stop Installed in Prague
https://www.praguemorning.cz/first-3d-t … in-prague/

Nexa3D expands digital dentistry customer reach
https://www.tctmagazine.com/additive-ma … mer-reach/

Solving Supply Chain Issues with 3D Printing
https://www.designnews.com/3dp/solving- … d-printing

Persistent supply chain troubles are prompting North American manufacturers to seek supply production closer to home. One major solution is the production use of 3D printing. The additive manufacturing process allows for just-in-time inventory that is close at hand. Some manufacturers are turning to service companies, while others are setting up 3D print production in-house.

Offline

#328 2022-09-24 03:26:06

Mars_B4_Moon
Member
Registered: 2006-03-23
Posts: 8,892

Re: 3D Printers

Researchers uncover how to 3D-print one of the strongest stainless steels
https://www.eurekalert.org/news-releases/965666



    A team of researchers from the National Institute of Standards and Technology (NIST), the University of Wisconsin-Madison and Argonne National Laboratory have identified particular 17-4 steel compositions that, when printed, match the properties of the conventionally manufactured version. The researchers’ strategy, described in the journal Additive Manufacturing, is based on high-speed data about the printing process they obtained using high-energy X-rays from a particle accelerator.

    The new findings could help producers of 17-4 PH parts use 3D printing to cut costs and increase their manufacturing flexibility.


some previous new mars forum discussion on printing
3D printing - strong progress
https://newmars.com/forums/viewtopic.php?id=8231
Considering 3D printing and a Martian political/economic landscape
https://newmars.com/forums/viewtopic.php?id=6862
3D Printers
https://newmars.com/forums/viewtopic.php?id=6976

Offline

#329 2022-09-24 06:35:51

tahanson43206
Moderator
Registered: 2018-04-27
Posts: 16,749

Re: 3D Printers

For Mars_B4_Moon re #328 Today 05:26:06

Thank you for finding and posting the link to a report on 3D Printing of steel that has properties similar to the traditionally manufactured product.  That sounds (to me at least) like a major breakthrough.

(th)

Offline

#330 2022-09-27 12:52:29

Mars_B4_Moon
Member
Registered: 2006-03-23
Posts: 8,892

Re: 3D Printers

House Printed in Spain (with eggs and dirt)

https://3dprinting.com/news/house-print … -and-dirt/

This version of the building is built with Mediterranean climates in mind. It has a small volume to allow easy heating in winter, and expandable in the summer months to make use of its surroundings.

The walls contain cavities that permit airflow and allow great insulation to prevent heat loss in winter. The structure offers protection from solar radiation in the summer months too.

Martian rock-metal composite shows potential of 3D printing on Mars  with video
https://news.wsu.edu/press-release/2022 … g-on-mars/

'This study is just a start, Bandyopadhyay said, and future research may yield better composites using different metals or 3D‑printing techniques.'

https://www.youtube.com/watch?v=wR1xyrI5Vsc

Offline

#331 2022-10-04 07:39:17

Mars_B4_Moon
Member
Registered: 2006-03-23
Posts: 8,892

Re: 3D Printers

Italian company manufactures world-renowned 3D-printed bicycle
https://interestingengineering.com/inno … ed-bicycle

Globally known Italian bicycle manufacturer Pinarello has unveiled a new 3D printed bicycle, "Bolide F HR 3D."

Produced as the fastest one in its field, Italian track and road cyclist Filippo Ganna is preparing to use the bike for his upcoming attempt at the UCI Hour Record.

Pinarello says this enabled it “to introduce new shapes and features that are impossible to replicate” using existing carbon fiber construction techniques.

older new mars forum discussion

'Bikes on Mars? - Don't laugh!'
https://newmars.com/forums/viewtopic.php?id=3504

Offline

#332 2022-10-09 17:49:15

Mars_B4_Moon
Member
Registered: 2006-03-23
Posts: 8,892

Re: 3D Printers

3D Printing is Being Used to Treat Children With Severe Burns
https://www.3dnatives.com/en/3d-printin … 051020224/

DZ and the Romans Ferrari Pediatric Rehabilitation Center have teamed up to use 3D printing to treat severe burns in children

Is 3D Printing Good for the Environment?
https://www.rd.com/article/how-does-3d- … uce-waste/

The tech behind 3D-printed homes
https://ia.acs.org.au/article/2022/the- … homes.html

Offline

#333 2022-10-11 08:30:41

Mars_B4_Moon
Member
Registered: 2006-03-23
Posts: 8,892

Re: 3D Printers

A Different Way To 3D Print Rockets

https://www.fabbaloo.com/news/a-differe … nt-rockets

Cloud Factory raises €2M in seed funding for 3D printed jewelry

https://www.3dprintingmedia.network/clo … d-jewelry/

Firm plans UK's first 3D printed homes scheme in Accrington
https://www.bbc.com/news/uk-england-lan … 180726.amp

A scheme to build 46 eco-homes for homeless veterans and low-income families

Offline

#334 2022-10-16 11:18:18

tahanson43206
Moderator
Registered: 2018-04-27
Posts: 16,749

Re: 3D Printers

For Mars_B4_Moon ... it is entirely possible you have already reported this.. I try to keep up with your posts but often fall behind ...

https://www.msn.com/en-us/lifestyle/sho … 7d713d758e

SlashGear

Bug-Like Flying 3D Printers Are A Powerful New Tool
Julian van der Merwe - Yesterday 3:00 PM

Close up of drone rotor

3D printing and additive manufacturing seem to be 21st-century goldmines, making waves in everything from jewelry and automotive manufacturing to construction in more recent years. Who would have thought that technology like 3D printing could be combined with two other emerging technologies — drones and AI — to make something truly remarkable?

A team of researchers from The University of Bath, led by Imperial College London, published a paper in the journal "Nature" that details a very tantalizing new construction tool: autonomous drones that work like insects to repair and potentially even build entire structures. The researchers dubbed the manufacturing method aerial additive manufacturing, or Aerial-AM for short.

The drones work on the same principle as extrusion 3D printers, which means they feature a print head that sits vertically over the workspace to place a stream of quick-setting material in layers on a surface. As the extrusion takes place, the print head moves to create the desired shape. Layers are added as needed to form a final product. We've seen large machines that deposit concrete to print small habitats; in the case of this new innovation, the researchers developed their own test materials described as cement-like, yet light enough for a drone to tote around.

Related video: Wasp-inspired drone can 3D-print structures on the fly

Since this technology depends upon the presence of a robust (thick) atmosphere, it is difficult for (me at least) to imagine it would work well on Mars out of doors.  However, it ** should ** work well in a pressurized space, and it would not matter to these devices if the atmosphere is all CO2.

Therefore, our artistic members with the ability to show images in posts have an opportunity to imagine mud-hive structures inside lava tubes on Mars (or the Moon for that matter).

(th)

Offline

#335 2022-10-16 12:18:06

Calliban
Member
From: Northern England, UK
Registered: 2019-08-18
Posts: 3,352

Re: 3D Printers

TH, that is a fascinating innovation.  The thin atmosphere of Mars is not neccesarily an impediment to flying drones if they are small.  The smaller something gets, the larger the ratio between surface area and volume.  Aerodynamic lift is a function of surface area.  This is how bees are able to fly with wings that are more like paddles than aerodynamic structures.  If bees were as large as people, or even as large as mice, they would lack the muscle power to fly.  For something as small as a mosquito, air is as viscous as syrup.

Another option is to have walking drones, rather like beatles.  These would be directly solar powered with PV cells lining their bodies.  The more sunlight available, the faster they work.  Parabolic structures like bee hive shapes can be built up without form work.  Nubian vaults can similarly be built without formwork.  Little robotic critters like this could build something like that using compressed regolith, or regolith with a chemical binder.

In most circumstances, I think this woukd be an expensive way of building.  But on Mars, where men would have to wear EV suits, it may turn out to be more cost effective than having astronauts in suits laying bricks.  The alternative, assuming we want to build a large number of identical structures, is to make some sort of reusable mold and cast the beehive.

Last edited by Calliban (2022-10-16 12:21:06)


"Plan and prepare for every possibility, and you will never act. It is nobler to have courage as we stumble into half the things we fear than to analyse every possible obstacle and begin nothing. Great things are achieved by embracing great dangers."

Offline

#336 2022-10-16 20:10:46

Mars_B4_Moon
Member
Registered: 2006-03-23
Posts: 8,892

Re: 3D Printers

Thanks for the Update I had seen news on Autonomous drones, printed cameras and printed part for Construction and Flying 'Printers' but I didn't get time to post any news.

Very interesting developments keep happening, news coming out each week with Printing and artificial software AI that it is difficult to keep up with news.

Offline

#337 2022-10-19 13:37:28

Mars_B4_Moon
Member
Registered: 2006-03-23
Posts: 8,892

Re: 3D Printers

3D Printing Entire Rockets?

Relativity to expand rocket engine test facility at Stennis
https://www.3dprintingmedia.network/rel … t-stennis/

Offline

#338 2022-10-26 19:06:33

Mars_B4_Moon
Member
Registered: 2006-03-23
Posts: 8,892

Re: 3D Printers

Relativity Space Unveils Next Generation Metal 3D Printers for Rockets
https://www.3dnatives.com/en/relativity … 271020224/

Formula 1 innovations fueled by the world’s fastest 3D printers
https://insights.globalspec.com/article … d-printers

In F1 racing, certain parts are especially well suited to customization with 3D printing.

3D printing fuel cell parts drives down costs (enormously)
https://www.3dprintingmedia.network/3d- … normously/

Offline

#339 2022-11-09 18:42:33

tahanson43206
Moderator
Registered: 2018-04-27
Posts: 16,749

Re: 3D Printers

The local 3D Printer User Group has been operating in hybrid mode since Covid, when all meetings were virtual.

The group leader is out of town, and the substitute leader did not set up the Virtual feed at the meeting site, so I've been holding up the Virtual service without any "customers".

It's a good opportunity to catch up on a variety of things, so I don't mind being "tied" to the feed for an hour.

(th)

Offline

#340 2023-01-19 09:27:02

tahanson43206
Moderator
Registered: 2018-04-27
Posts: 16,749

Re: 3D Printers

The new Space Plane topic provides an opportunity to return to the use of 3D printers to make complex shapes.

https://www.nasa.gov/sites/default/file … _final.pdf

The article at the link above starts out reporting on experiments to 3D Print heat shields for space vehicles.

Regardless of how that article turns out (if someone has time to read it) this topic is available for discussion (or reporting) on the use of 3D printers to make custom heat shields for a Space Plane (or any vehicle returning from orbit).

I am specifically looking for reports of printing glass foam using a 3D Printer.

Unlike the Space Shuttle glass tiles, a 3D printer could print the entire side of a space craft, so it could be bolted onto a rectangular space craft body (or a cylindrical one since that configuration is so common in the aircraft industry).

(th)

Offline

#341 2023-02-18 13:43:31

Mars_B4_Moon
Member
Registered: 2006-03-23
Posts: 8,892

Re: 3D Printers

Gun and Weapons

Winnipeg police seize 3D-printed gun during attempted shoplifting, two men arrested
https://winnipeg.ctvnews.ca/winnipeg-po … -1.6279725

UK develops 3D-printed 'suicide drone' to aid Ukraine against Russia
https://interestingengineering.com/inno … ine-russia

Offline

#342 2023-02-22 07:56:17

Mars_B4_Moon
Member
Registered: 2006-03-23
Posts: 8,892

Re: 3D Printers

DoD invests additional $1.5M toward 3D-printed hypersonic rocket engine

https://www.spacedaily.com/reports/Defe … e_999.html

The Department of Defense awarded a $1.5 million contract to New Frontier Aerospace to continue its work on a 3D printed rocket engine.

The aerospace manufacturer announced the deal in a press release on Tuesday with funding coming from the National Security Innovation Capital. The company is developing a plastic-fueled rocket engine called Mjolnir. Development began with a $750,000 contract from the NSIC in 2020.

The new contract will fund the development of the remaining parts needed to complete the engine. The company plans to run a final test - called a hotfire test - by May 2024.

"Based on NFA's performance in designing, 3D printing and testing the first, key component of the Mjolnir. full-flow staged combustion engine in less than a year, we are pleased NSIC sees the enormous potential in the continued development and completion of Mjolnir.," NFA CEO Bill Bruner said in a statement.

Last edited by Mars_B4_Moon (2023-02-22 07:57:47)

Offline

#343 2023-02-24 07:00:49

Mars_B4_Moon
Member
Registered: 2006-03-23
Posts: 8,892

Re: 3D Printers

The Smallest 3D Printer in the World Is No Bigger Than a Match
https://www.3dnatives.com/en/the-smalle … 240220234/

In a world-first, chemists print complex structurally colored 3D objects
https://phys.org/news/2023-02-world-fir … ex-3d.html

Offline

#344 2023-03-08 15:35:53

Mars_B4_Moon
Member
Registered: 2006-03-23
Posts: 8,892

Re: 3D Printers

'Relativity Space'

World's first 3D-printed rocket set to make inaugural flight
https://www.nbcnews.com/science/space/w … -rcna73868

Offline

#345 2023-03-14 04:56:06

Mars_B4_Moon
Member
Registered: 2006-03-23
Posts: 8,892

Re: 3D Printers

maybe one day the sculptures, arts and temples on Earth could be printed for a Mars colony?


Velo3D has announced the details for its 2023 roadshow, the Proof is in the Printing Additive Manufacturing Tour, which will visit eight cities across the US.
https://www.voxelmatters.com/velo3ds-pr … us-cities/
The tour builds on Velo3D’s previous roadshow series that brought together more than 400 engineers around the US to learn about how metal additive manufacturing can help them transform their businesses.



‘Tactile Tours’: How Can 3D Printing Facilitate Access to Art and Culture For the Visually Impaired?
https://www.3dnatives.com/en/access-art … 090320235/


Second attempt at launch of 3D-printed rocket from Relativity Space scrubbed
https://www.yahoo.com/entertainment/3d- … 39132.html


Another day and no launch Terran 1 is a 110-foot tall rocket, 33.5 meters and made of mostly 3D-printed material

Last edited by Mars_B4_Moon (2023-03-14 04:58:07)

Offline

#346 2023-03-19 06:10:25

Mars_B4_Moon
Member
Registered: 2006-03-23
Posts: 8,892

Re: 3D Printers

quote

'SpaceX CRS-27, also known as SpX-27, a Commercial Resupply Service mission to the International Space Station (ISS) launched on 15th day of March 2023'

Investigation will test 3D printed materials for satellite manufacturing
https://www.spacedaily.com/reports/Inve … g_999.html

As 3D printed rockets, car parts, and even homes begin to hit the market on Earth, L3Harris Technologies aims to leverage the International Space Station (ISS) National Laboratory in its search for durable materials to 3D print satellite components. Before 3D printed materials can be used to build more sustainable and efficient parts for spacecraft, they must be tested to ensure they can withstand the harsh environment of low Earth orbit (LEO).

Among the payloads launching on SpaceX's upcoming 27th Commercial Resupply Services (CRS) mission is a project to test an L3Harris-designed 3D printed radio frequency (RF) circuit and various 3D printed material samples. The project is a continuation of a 2021 experiment on the ISS that collected two months of data.

This time, L3Harris will also test photonic material for a new technology called photonic integrated circuits. Used for satellite communications and similar to computer chips, these circuits utilize light instead of electrons in conventional electronics, similar to how light carries information in fiber optic cables for phone and internet data.

"We're excited to test the 3D printed materials for six months and compare the new results with previous ISS experiments and ground tests," said Arthur C. Paolella, senior scientist and technical fellow with L3Harris, an aerospace and defense industry leader. "The ability to 3D print materials for use in space opens up new possibilities for satellite design and construction while making spacecraft manufacturing more cost-effective and efficient."

Eduardo Rojas, director of the Wireless Devices and Electromagnetics Laboratory at Embry Riddle Aeronautical University, and his students are assisting with the experiment. The investigation will utilize the MISSE Flight Facility (owned and operated by ISS National Lab Commercial Service Provider Aegis Aerospace) mounted to the exterior of the ISS.

There, the material samples will experience the harshness of space in the ultimate test of their durability. The materials will be subjected to various conditions, including extreme temperatures and radiation, to validate their performance in the same environment where the satellites will operate.

"While we can test the durability of these materials on Earth against one or two of these factors at a time, on the ISS, we can test every potential hazard-and all at once," Paolella said.

Offline

#347 2023-03-19 06:52:34

tahanson43206
Moderator
Registered: 2018-04-27
Posts: 16,749

Re: 3D Printers

For Mars_B4_Moon re #346

Thank you for this encouraging update to Louis' long running topic.  It is good to see Louis' topics come back into view from time to time.

In this case, it occurred to me that the current hiatus in development of the Large Ship concept of RobertDyck might be given a small impulse towards restart by a vision of 3D printing the entire Large Ship.  The team working on assembly of Large Ship in orbit ran out of energy as it confronted the details of how to assemble flat plate (or coiled metal) in space to make ** just ** the floor of the rotating habitat.

(th)

Offline

#348 2023-03-26 10:17:19

Mars_B4_Moon
Member
Registered: 2006-03-23
Posts: 8,892

Re: 3D Printers

UTEP joins project to 3D print batteries from lunar and Martian soil
https://www.spacedaily.com/reports/UTEP … l_999.html

The long-term goal of the project is to maximize the sustainability of astronauts' future lunar and Martian missions by reducing payload weight and dead volume. The utilization of local resources widely available on the moon or Mars is crucial to develop infrastructure such as habitation modules, power generation and energy storage facilities.

Last edited by Mars_B4_Moon (2023-03-30 05:15:04)

Offline

#349 2023-03-30 05:14:27

Mars_B4_Moon
Member
Registered: 2006-03-23
Posts: 8,892

Re: 3D Printers

3D-Printing Batteries from Lunar and Martian Soil: A New Frontier in Space Exploration and Sustainable Living

https://magazine.mindplex.ai/mp_news/3d … le-living/

Offline

#350 2023-04-13 12:12:25

Mars_B4_Moon
Member
Registered: 2006-03-23
Posts: 8,892

Re: 3D Printers

Inside the 3D-printed box in Texas where humans will prepare for Mars

https://www.theguardian.com/science/202 … epare-mars

Watching four people spend a year in a 3D-printed box is Nasa’s next small step toward landing humans on the surface of Mars. Nasa says it hopes to send humans to the red planet as early as the 2030s. The first mission could be a nine-month trip one-way, and could leave the astronauts on the surface for two and a half years before starting the long trip back home.

Preparations for that trek are already well under way with the agency’s Artemis program. Artemis is sending astronauts back to the Moon for the first time since 1972, including the first person of color and woman to walk on another celestial body. As part of the Artemis missions, Nasa is also launching Gateway, a space station that will orbit the Moon and serve as a pit stop for Mars-bound missions.

Getting to the Moon means getting to Mars, and getting to Mars means testing the physical and behavioral health of a crew in isolation. That’s where Chapea comes in.

Offline

Board footer

Powered by FluxBB