Debug: Database connection successful
You are not logged in.
Things seem to be gathering pace all round!
It's been proposed that layering the Mars surface with silica aerogel could be enough for terraformation: "Through modeling and experiments, the researchers show that a 2- to 3-centimeter-thick shield of silica aerogel could transmit enough visible light for photosynthesis, block hazardous ultraviolet radiation, and raise temperatures underneath permanently above the melting point of water, all without the need for any internal heat source."
This is actually rather close to an idea I had back in the day of covering large sections of the planet with plastic sheeting...
Let's Go to Mars...Google on: Fast Track to Mars blogspot.com
Offline
Like button can go here
In voids topic we have talked about the uses of aerogel for mars.
In the past I sugested that you use the blister package plastic of Robertdycks to form a geodesic like dome with the materials sandwiched in between the segments to assemble a light weight mass dome.
Sure placing it in proximity to mars surface but not on it as then you can not use what is there until you build well above it to begin with.
Enabling Martian habitability with silica aerogel via the solid-state greenhouse effect
An overview on silica aerogels synthesis and different mechanical reinforcing strategies
https://www.universetoday.com/142876/bl … habitable/
Some would want to cover the poles to cause the releasal of co2 to thinken up the atmospher for a global warming effect.
Offline
Like button can go here
Yes - indeed. But I think this paper is talking about directly putting down layers of 2 to 3 cm deep aerogel over the surface, the point being that gases formed as a result will simply lift the layer somewhat.
In voids topic we have talked about the uses of aerogel for mars.
In the past I sugested that you use the blister package plastic of Robertdycks to form a geodesic like dome with the materials sandwiched in between the segments to assemble a light weight mass dome.Sure placing it in proximity to mars surface but not on it as then you can not use what is there until you build well above it to begin with.
Enabling Martian habitability with silica aerogel via the solid-state greenhouse effect
An overview on silica aerogels synthesis and different mechanical reinforcing strategies
https://www.universetoday.com/142876/bl … habitable/
Some would want to cover the poles to cause the releasal of co2 to thinken up the atmospher for a global warming effect.
Let's Go to Mars...Google on: Fast Track to Mars blogspot.com
Offline
Like button can go here
Aerogel Insulation Mat Fiberglass Gasket Blanket for Pipelines Ship Bulkheads Household Appliances Lifesaving Cabin
Density: 180-220kg/m3
Bending Strength: 45KP
Breaking Elongation: 65%
Compressive Strength: 32N
Thickness: 3mm / 6mm / 10mm
Low Temperature Bending: ≤99%
Material: Fiberglass + Nano Silica Aerogel
Size: (L)X(W) 140x30cm / 55.12''x11.81''(appr.)
Thermal Conductivity: 0.012 - 0.018w/m·k (At 25℃)
https://pdfs.semanticscholar.org/73a3/e … 764472.pdf
Silica Aerogel as Super Thermal and Acoustic Insulation Materials
Last edited by SpaceNut (2019-09-10 17:51:02)
Offline
Like button can go here
If we covered say about 70% of the planet (100 million sq. kms) with the silica aerogel at 3 cm thickness I make that about 3,000 cubic kilometres of stuff. Feel free to check my maths! Do it over a period of 100 years...30 cubic kms per annum...total concrete production on Earth is about 8 cubic kms pa. So not entirely fanciful...but a huge undertaking!
Last edited by louis (2019-09-10 13:31:12)
Let's Go to Mars...Google on: Fast Track to Mars blogspot.com
Offline
Like button can go here