You are not logged in.
Louis:
I went and looked at Reaction Engines' web page, and crawled around a bit just looking. Things have changed since I first ran across them a few years ago.
Most or all of the essential engine component technologies are now funded development programs of this or that agency. If these component technologies can be made to work about as thought, then the system can really be built. Like most web sites, it's quite optimistic, but I saw enough "meat" to know for sure it's "real", meaning this thing might eventually fly. They do have a long way to go proving all the engine components. And then there's some airframe components that will have to be proven, most notably the heat shield.
A look at their web site was reminiscent of looking at XCOR Aerospace's site, except Reaction Engines is fairly big by comparison. Yet, I know that XCOR's Lynx suborbital tourist spaceplane is "for real", too. You should go visit their site.
I've sat in their Lynx mockup, and it's simple enough even I could fly that spaceplane. My contacts there tell me Lynx number 1 is being built this year on their hangar floor.
XCOR is about 30 guys and gals in one hangar at the Mojave, CA municipal airport. They've made their living so far selling rocket engines with the life, restart, and maintenance characteristics one expects from FAA-certified aircraft engines. They're definitely "for real", too. Watch them, I think they'll impress you next year.
Most of the rest of the flightline at that airport is owned by Burt Rutan / Scaled Composites. Last time I saw Burt in person was 1985. Didn't get to go visit him, when I visited XCOR recently (who's looking for ramjet help from me).
GW
Mark:
I looked at the link. That's the absorption-degas analog of the dry ice confined-heating self compression I had thought about. Very clever. I never knew adsorption had reached storage volumes that large. That's a good technique. Once it's near 17 psia, then ordinary compressors could take it to 2000 psi if need be.
The fuel-maker sounds intriguing, too. I've recently become a fan of methane-LOX here as a cleaner alternative to kerosene-LOX.
These items are the sort of gear that needs to get scaled up and taken along on the first mission or two, to get thoroughly checked-out and wrung-out of any hidden "gotchas". After that, it's ready for prime time, and the very thing we need.
You must be younger than I am, with more recent industry experiences and connections, to know of such things.
GW
There's ways to run electric wires safely in water. Your enclose-the-wires-dry inside a tube is one good way. I kinda like it.
Concentrating solar thermal is a good way to generate wet saturated steam. That's all we would need for heat. Plus, there's waste heat from the lights.
Most of the plumbing would be down in the pond, except for hot lines to and from the solar collector. Freezing should not be an issue as long as heat is being collected. Perhaps two collectors for the safety of redundancy.
I'm really liking this agricultural pond idea. It looks far easier than any kind of pressure domes or enclosures on the surface. But limited to "seafood" is not good enough. The surface enclosure / dry land plant approach needs a pressure solution too.
GW
Rune:
I've seen a lot of re-entering satellites, and I watched Columbia re-enter in pieces, although I didn't know it was Columbia until about 10 minutes later. Thinking back on what I saw, and watching the video footage others took over-and-over, I pretty well figured out what I saw.
The ship lost its wing to the foam impact damage at about M12 over the Texas-New Mexico border. (It was photographed over New Mexico at M15 intact but streaming debris from an obviously-failing wing.) It tumbled and immediately lost its other wing, vertical fin, and bay doors to the hypersonic wind blast.
2-3 seconds later the windshield caved in, ripping the top off the flight deck, and the 4 astronauts there were ripped out from under their seat belts in pieces. 3000-5000 psf q does that. No time to burn, just blunt wind blast pressure forces. Those 4 torn-apart astronauts were the body parts that rained down just east of Dallas, a little cooked, but not burnt.
We knew about the vulnerability of the windscreen to direct hypersonic stream impingement when I was a grad student in 1973. Found it in wind tunnel tests, and found the narrow range of AOA where the stream safely jumps over the cockpit, as a separated flow. Lose attitude control, you're dead.
When it was over Dallas at about M6 or 7, that's when I saw it from outside Waco, Texas, to my north about 100 miles slant range. The heavy engine thrust structure had already separated. It and the fuselage (cabin still attached) led the debris stream. The wings were fluttering along behind, along with the chunks of bay doors and the fin, and a whole cloud of smaller pieces, maybe 2 dozen or so. The fuselage and thrust structure were tumbling. I could not see them tumble, but they were leaving characteristically-braided contrails.
I watched it go eastward until the contrails dimmed as the hypersonics faded into "mere" supersonics. Between Dallas and Tyler, I saw the fuselage break up as a fan of pieces, leaving the cabin tumbling alone and still mostly intact, except for the lost flight deck roof. A contact at NASA confirmed to me that the three on the mid deck were still alive at that point, although I hope the gee-force pounding had beaten them unconscious. That's the last I saw of it, visually.
Seconds later the cabin decelerated to about M1/20kft, and was crushed by the rapidly-rising wind pressures again. My contact at NASA said that's when the 3 mid deck astronauts died by blunt force trauma, not upon impact with the ground seconds later. If stabilized so as not to tumble, it would not have crushed like that.
Clearly, lots of the structures survived the re-entry in recognizable condition. This includes uniform patches and plastic parts from the interior. No, this stuff doesn't burn up on re-entry the way all the "experts" always said it did all these years. There isn't time to burn, it decelerates quite rapidly. The pieces literally heat-sink their way through reentry on a transient.
As for crew survival, you separate the cabin from the cargo bay with a shaped charge, and stream an inflated drogue from the nose to take the spin off the cabin. If there’s enough warning time, the flight deck crew can evacuate down to the middeck. Otherwise, windshield failure and flight deck roof loss is very likely before the drogue can stabilize it. As it slows to “mere” supersonic speed, you blow the hatch. All survivors on the mid deck have but seconds to jump before impact, but that’s better than no chance at all.
It was the same with Skylab in 1979. Fragile thin-shell aluminum remained intact as one single radar return down to 40 nautical mile altitude, about halfway through reentry (around M12, just like Columbia). Minutes later, although the solar wings and telescope mount were gone, the main body was still in one piece when it completed reentry just off the western Australian coast.
It finally broke up over land at about M1/20kft, while ballistically falling into rapidly rising q at low altitudes as the path angle quickly steepened downward. Of 85-90 tons at reentry, they picked up 75 tons of debris in Australia. Nope, these things most definitely do not "burn up".
GW
As for chicken-and-egg problems, that has always obtained with new commercial ventures of any size at all.
You solve it by bootstrapping and "leverage" (really, financial cheating). Do things by increments, etc. Things eventually happen, it's just not nearly as fast as most of us would like.
Sometimes, you get public-private partnerships that help by financing some of it with tax money. Sometimes not (for the next few decades, I think not, conditions are just too strained right now to count on that).
Lately, I've been betting more on the likes of Spacex, XCOR, and several others. Now there's PRI looks promising, too. Vision is not yet dead among us. That's hopeful.
GW
Just singing like a canary, I guess.
Do y'all really think they'll find things like platinum in ore bodies rich enough to process in these NEO's? That's the sort of product with value down here. The volatiles would have value in LEO, not down here. At least to my way of thinking.
What about the stony minerals? Any use for them that anyone can see?
I'm not sure about the nickel-iron. Whether there's any value down here is questionable, I suppose, since we have so much recyclable steel. But for steel construction on the moon, Mars, and elsewhere, it could be quite valuable, once there's folks there on those places who need it. Not yet, but "soon".
GW
I dunno what a "solid state compressor" is, but I'm glad to hear there is one and that it works. Sounds like that "do it a different way" I suggested has "already been done". That's great news.
What kind of propellants did they make at Pioneer?
GW
I'm thinking electric lights just because Earth plants need visible light centered at green wavelength, plus a snit of UV, to survive well.
Steam is a very good way to transmit heat, though.
GW
Monopoly pricing is no surprise. Historically.
GW
Louis:
Both shuttle accidents showed pressure cabin separation from the rest of the debris (I witnessed this with my own eyes during Columbia's destruction, right from my front yard). Structurally, the weak point was the cabin to cargo bay joint, where the structure went from a closed tube to an open tube (no strength in the bay doors).
If you take the spin off the pressure cabin (pressurized or not, the crew should be in suits, who cares if it is punctured in some way), you can use the compartment between cockpit (two levels) and cargo bay as a sacrificial "heat shield", with nothing more than a stabilizing drogue from the nose.
Once the noisy hypersonics quiet down, you are are low-supersonic decelerating toward M1/20kft max q, and only dozens of seconds from impact. You quickly blow the hatch, and jump out on personnel chutes with an oxygen bottle. No wings, so we don't need the silly pole and tractor rocket motors.
We have known since WW2 that crews were unable to bail out from spinning airplanes due to centrifugal forces. In fact, that problem was the original rationale behind ejection seats.
But for a shuttle pressure cabin, a de-spin drogue is simply more practical.
We have also known since WW2 that bailout from a non-spinning airplane is easy. Just don't do it above about M1 or thereabouts, because of the nonsurvivable wind blast (known since the early 50's). Which transonic point is some 20kft on the typical ballistic re-entry trajectory, even for debris.
GW
Spacenut:
That conversion ratio vs reactor pressure curve you posted shows exactly what I am talking about. Yield is better the higher your reaction pressure, in a nonlinear fashion. Everything "falls off a cliff" between 0.1 and 1.0 atm. Mars is 0.007 atm in its open "air". Compression above 30:1 is a real problem, as I have already described.
All that says is "do it a different way".
I've never said not to do ISRU. But most of the pre-conceived notions of exactly how to do ISRU look like crap to me.
GW
A part of what y'all are debating here (costs of ground control) is something I have written posts about before. The result you get depends upon whether PRI uses the NASA model, the ULA model, or the Spacex model. If it takes the population of a major American city to support your launches and flights, when you add up all the contractors and vendors too, that's the NASA model, and it is precisely why a shuttle launch was $1.5 B. At 25 metric tons max payload, that's $27,000/lb.
On the other hand, there's Spacex, who for the first time in history uses the population of only a small Texas country town to support launches and missions. This is why Spacex is charging about $2500/lb for a 10.1-max metric ton payload on Falcon-9. Factor-ten better is no mean feat! Three cheers for visionary-led private enterprise!
There is a launch vehicle scale effect that applies here: bigger rockets should lead to lower per-lb payload costs when delivering max payload. Now, ULA's Atlas V, in the -551 and -552 configurations, is priced at 2400/lb at a max 25 metric ton payload size. (All of this is LEO from Canaveral.)
But, Falcon-Heavy is projected at 53 metric tons for $800-1000/lb on Spacex's website. Conclusion: ULA is too high for the payload size, they ought to be nearer $1500-1700/lb. Boeing and Lockheed-Martin are gigantic corporations, while Spacex is not. Does anybody else see the advantage of a small, lean company here? (Or the advantage of any for-profit company over a government agency?)
If you think and act like a Spacex, asteroid mining could actually be profitable. If you think and act like a ULA, maybe not. If you think and act like NASA, never. That's the real lesson of what we have seen for the last 50 years or so. It's hard to argue with numbers interpreted in the light of actual history.
Comments?
GW
RobS:
Unfortunately, the problem really isn't containment. That's just about an inch of steel in a gas bottle's wall at well above 2000 psig, and there's not very many of those bottles in real system, not compared to the mass of the compressor itself, even here.
The problem is the size and efficiency (more than one sense here, see also next paragraph) of the compressor. That machinery here is 30 to 70% energetically efficient, meaning throughput massflow x enthalpy rise (more or less proportional to compression ratio) compared to shaft power input. On Mars there is the same basic machinery friction to fight, but only about 0.6% of the throughput. So, the energy efficiency is way-to-hell-and-gone far lower there, unless you reduce compression ratio very, very, very drastically in proportion. Which trends toward very little product. Which trends toward not being usable. Not a picture I like.
There is also the problem of throughput x time-to-accumulate-a-given-mass compared to the mass of the compression machinery. This is proportional to inlet density ratio, no matter what else. On Mars, that's 0.6% of here. No compressor capable of filling a welding gas bottle at a useful pressure will ever be small on Mars. Laws of physics preclude it. If it ain't small, who's going to pay to ship it there? Another picture I don't like.
Sorry. Too much knowledge is a dangerous thing, just like too little.
But I am still very intrigued by thermal self-compression of CO2 and H2O in confined spaces. Low grade heat is cheap and lightweight, even on Mars.
GW
Actually, on the buried glacier, you start the pond construction by nothing more than pumping heat down a well drilled into the glacier. The bulldozer is for simply smoothing and adjusting the regolith cover. Melt out a cavity you can get into, then "hot fire hose" it to the shape and size you want. Add habitat with airlocks into the water and on the surface. Rig the lights. Add organic matter and transplanted Earth water plants. Voila: operating farmland on Mars.
GW
There seems to be lots of buried ice on Mars. Why not dig the ice-covered agriculture pond on a buried glacier? Then, the liquid and ice are in equilibrium, and you don't lose water as a groundwater current into dry regolith. Except for the cracks in the rock, digging ponds in bedrock does the same thing. These are all problems that can be solved.
I really don't see why acres and acres of Mars's surface cannot be quickly put into aquaculture production with no more sophisticated heavy construction machinery than a bulldozer operable in vacuum. There might even be a way to do a hydrogen peroxide-hydrocarbon piston engine to power it at high force levels.
This is not first mission stuff, but pieces of it should definitely be tried on the first mission or two, so that this technology will be ready for use on the mission that actually establishes a base of some kind.
GW
Well, passenger safety with a launch rocket such as Falcon-9 or Falcon-Heavy depends upon a good escape system. I think Spacex's use of the capsule itself fully powered as the escape vehicle, is a better idea than the old escape tower we used on Mercury and Apollo. You have coverage from ignition all the way to orbit. The tower didn't work after jettison.
With an airliner-like vehicle (such as Skylon), you have to make the craft "utterly reliable" so that no escape system is needed (sounds hauntingly familiar, like "make the ship unsinkable", right? Well, that's exactly what you have to do).
That's what we tried to do with shuttle, and failed. A fragile heatshield, exposed to debris impact in a side-mounted cluster, is two strikes against you right there. Add foam insulation that peels off, and you kill a crew. We did.
That's why Skylon is proposed as an unmanned cargo vehicle. Flying it like that for a while will uncover all the "gotchas", which can be fixed in a follow-on design that could be manned. That's actually the smart way to do it. Because of its unique engines, Skylon is really a feasibility demonstration vehicle. Until we've flown it for a while.
Any high-energy vehicle, be it a vertical launch rocket or some kind of spaceplane, will be risky. That is just plain unavoidable. But it can be managed and designed-for.
Feasibility of spaceflight itself is no longer in doubt. For passenger service, we need to get the safety-of-flight engineers in on the ground floor of all vehicle designs from now on. After 50+ years, we're finally doing that. They did it at Spacex, and I'm proud of them for it.
Actually, there was a way to have saved both shuttle crews, and it was not what they implemented. My idea was hindsight-only for Challenger, but afterward it was never done, which is why Columbia's crew died. I couldn't get NASA to listen to me. Outsider, "not invented here", and all that jazz. But to this day I still show spaceflight crew escape concepts on my resume as something I consult in.
GW
On the compression thing: I cannot claim to be familiar with everything that has been proposed. I am familiar with recip and turbine. And basic thermodynamics. Yes, we have compressors on submarines that charge air banks from 1 atm to 500 atm. They are gigantic, heavy things, carried by a sub weighing 4-7000 tons. That kind of thing does not miniaturize well. And, we're talking about a compression ratio final/input of 500.
Most of the aircraft compression machinery we have is under-30 for compression ratio, most of them under 15 or so. What goes on in a shop air compressor and what goes on inside a piston engine are comparable at compression ratios in the 6-11 range. All of these devices are light enough to fly, and all of them miniaturize well. It is the lower compression ratio that allows them to be miniaturizable and be flightweight.
Mars's atmosphere is 7 mbar, except up on the highlands and mountains where it's nearer 2 mbar. But let's go with 7 mbar. Picking a challenging miniaturizable/flightweight compression ratio like 30, that's a bottled gas pressure of 210 mbar, or about 20% of 1 atm. Most of the chemistry processes I know of take place at 1-30 atm. Well, it seems like that might be a serious problem. Although, exploring low-pressure chemistry is something we can do, right here. But dollars to doughnuts, I'll bet you it ain't ready yet to go to Mars.
On the other hand, lets look at the submarine high-pressure air bank compression ratio of 500, and use that at 7 mbar. 3500 mbar, about 3.5 atm, that's usable with chemistry processes we already use industrially. The only problem is the huge tonnage of machinery for a throughput that scales down directly with inlet density (about 0.6% of that here). Heavy, inefficient. I see not much promise down that path.
Take some dry ice frost, pack it tightly into a steel can with a valve and an outlet pipe, and seal it up. Heat it with low-grade energy (solar thermal would work, albeit slowly). The CO2 vaporizes, but cannot expand, so the pressure rises by the specific volume ratio at a constant process temperature. That's a factor in the hundreds to around a thousand (don't have a thermodynamic properties table for CO2 handy).
There's a compression ratio comparable to the sub's high-pressure air bank, done with steel cans, high-pressure tubing, ordinary gas bottle plumbing, and a solar-thermal panel. Admittedly, it's a batch process, not so amenable to robotic operation. But it could be done. All you need is a source of dry ice.
That's the numbers for the kind of problem we are talking about here. If you want to make methane and oxygen out of CO2 and H20, on Mars, the poles are the place to do it. Unfortunately, that's not where the first landing(s) will take place.
That's also a part of my point: every site on Mars is different. There is no one "average Mars" we can put in a simulation chamber here on Earth.
GW
Please don't misunderstand ... I'm not against ISRU on the first mission. I'm against betting lives on unproven equipment needlessly.
Nothing never-before-done-in-situ can be considered proven. We can't really do "real ISRU" till we land on Mars. Simulations can be quite good sometimes, but it just ain't the real thing. Because our estimates of site conditions are only estimates.
It is essential to thoroughly try out everything we can dream up for ISRU from mission-1 on. I just don't think it'll work as good as folks wish. More than 50% of our early rocket shots in the 50's were failures. This is no different: it takes real trials to find and fix all the "gotchas", and believe me, there will be "gotchas".
I do have some qualms about using a nearly-pure CO2 atmosphere to make stuff like fuel. The density is so low. And how do you compress in any practical equipment from 7 mbar to 10,000 mbar or more? We have never built compressors like that before, recip or turbine, other than near-zero throughput lab devices. Not very many of them, either.
One "out" for compression might be to refrigerate a large volume of atmospheric CO2 to solidify it, pack it into a much smaller volume sealed container with no free volume, then re-heat it. Re-gasification confined like that is automatic compression of the product gas. Energetically, that's not a very efficient process because of the refrigeration, but it might be more practical to do. I just don't know.
We might be better off just mining solid dry ice near the poles, and doing confined-heating compression that way to get CO2 gas bottled at pressures we can really use. But that's not viable ISRU unless you land near one of the poles. See what I mean?
GW
Hi Rune!! How are you?
This asteroid mining stuff not only might be fun, it might even be practical. To see some billionaires pony-up to try it out is really encouraging.
I hope they visit sites like our forums. There's a lot of good ideas being bandied about here.
GW
Well, you try to rig the rocket so that if one engine explodes, the rest don't. That's the kind of suspenders-and-belt (and armored codpiece!!) design that is needed to take on the challenge of a Mars mission.
GW
I think that one could build an ice-covered pond, covered in turn by around 6-15 inches of regolith, and have stable fresh water underneath. The ice would be stable under the regolith. We've already seen that on Mars.
If the ice were a few meters thick, the pressure in the covered water would be high enough that a human diver on pure oxygen would not need a pressure suit. Just a wetsuit to stay warm at 0 C, and a pure-oxygen SCUBA, would work.
The way to keep the water liquid under the ice is the same as that required to grow aquatic Earth plants: use a sunlight-simulating electric lamp. Hence, it is possible right now to grow aquatic plants anywhere on Mars. No terraforming required. This is the best way I can imagine to turn acres and acres of surface to productive agriculture without building any sort of pressure domes.
Actually, it might even be made to work on the moon. Or, the asteroids.
There is the energy cost of running the lights. That's what solar PV and nuclear power are for.
GW
There's already a light gas gun launching small (around 5 pound) payloads at M17 for USAF for hire. It's a private venture. I saw their paper at the 14th annual Mars Society convention in Dallas last summer, same advanced technology session as my Mars mission design paper.
Bigger diameter, higher launch angle (more than anything else), a bit more fuel-oxidizer combustion power, and you reach orbital altitudes at almost-orbital speed. From there it's a very small rocket burn to circularize in LEO. Almost nothing but an old standard Mark 25 solid JATO motor, for a pretty substantial payload (hundreds to thousands of pounds). I don't remember the specific numbers, but it looked pretty good to me. Perfect for refueling an already-existing vehicle, especially if what you shoot up there is water, as tougher-than-an-old-boot ice. The real problem is launch gees. Thousands of them. Just like an artillery shell. Something we already know know to handle, just not with fragile stuff. Gun launch cost looked like about $100-200/pound, compared to Falcon-Heavy at $800-1000/pound.
As for ISRU on the first mission or two to Mars, by all means send such gear for trials, but absolutely don't count on it working right! Chances are, it will not work right, perhaps not at all, especially on the first mission. Probably not even the second.
Accordingly, it would be entirely stupid to count on ISRU for crew survival and return on the first mission. Nothing is more expensive than a dead crew. Ask NASA. They've seen it 3 times now (Apollo-1, Challenger, and Columbia). Nearly saw it on Gemini-8, Gemini-7, and Apollo-13.
It takes on the average 1.5 to 2 full scale, all-up trials of new equipment before it comes close to working "right", and that's with some very talented, artful people working the problem. That's nearly 20 years' aerospace engineering experience talking. Rocket science ain't science, it's about 50% art never written down. It's about 40% science actually written down somewhere. And, it's about 10% blind dumb luck, and you have to plan for that.
It's no different in any of the other disciplines, either. That's why the non-flight engineering disciplines use such whopping huge safety factors. Those of us designing things that fly could not afford that luxury. Fundamentally, that's why flying things are more expensive.
GW
Why would we want to resurrect an ancient 1960-vintage kerosene-LOX technology when we already have a better one? The F-1's were in the neighborhood of 265 sec Isp at sea level. Newer kerolox engines are approaching 290 sec Isp for sea level performance. Thrust depends only upon size, once you hit the chamber pressure regime needed for better Isp.
Admittedly, for a first stage, thrust is way more important than Isp. But that barrier's already been breached with the newer, higher chamber-pressure, engines that yield the same thrust per unit size, for better Isp.
It would be more fruitful to scale those newer engines up, or just stack up more of them.
GW
Louis:
No, the real problem is one of making heat transfer occur as fast as the other propulsion processes, when it truly and fundamentally does not want to be that fast. Skylon's engine is basically a liquid air cycle engine. No one else has ever made liquid air that fast, ever. But, Reaction Engines just might. I'm rootin' for 'em.
GW
edit to add content
http://newmars.com/forums/viewtopic.php … 18#p111418
RGClark wrote:GW Johnson wrote:For Bob Clark: airbreather thrust, particularly ramjet, is very strongly (dominantly) dependent upon flight speed and altitude air density. The nozzle thrust is calculated same way as a rocket (chamber total pressure, gas properties, pressure ratio across the nozzle, and nozzle geometry), the pressure is just lower and the expansion ratio a lot less. You do need to worry about the difference between static and total chamber pressure, unlike most rockets.
The ram drag is the drag of decelerating the ingested stream of air into the vehicle. Its massflow multiplied by its freestream velocity (in appropriate units of measure) is the way that is done. But, nozzle force minus ram drag is only "net jet" thrust. There are several more propulsion-related drag items to account.
There is spillage drag for subcritical inlet operation (which also means reduced inlet massflow!), additive or pre-entry drag for ingested stream tubes in contact with the vehicle forebody, and the drag of boundary layer diverters or bleed slots, quite common with supersonic inlets. None of those are simple to calculate "from scratch" (we use wind tunnel test data to correlate empirically a coefficient for each as a function of Mach and vehicle attitude angles), and taken together they are often quite a significant force.
If you subtract that sum of drags from net jet thrust, you have the "local" or "installed" thrust, corresponding with just plain airframe drag. Most airframers work in that definition. If you don't, then you have to add that sum of propulsive drags to the airframe drag to get the corresponding proper drag for "net jet" thrust-drag accounting (not very popular outside the propulsion community).Thanks for the detailed response. That's actually a little too much detail for what I need. I read your post on ramjet boosters:
Sunday, August 22, 2010
Two Ramjet Aircraft Booster Studies
http://exrocketman.blogspot.com/2010/08 … e-boe.htmlI noted that you were able to get better payload with more shallow launch angle but it created a problem for retrieving the first stage booster, since it went so far downrange. If I'm reading it correctly you were able to double the payload mass with the shallow angle, presumably using aerodynamic lift.
What I'm trying to determine if I can increase my payload just going to the range turbojets can get to, ca. Mach 3+. I intend to use the jets to get to medium altitude for a turbojet, ca. 15,000 m. But I need to get to a good angle as well as reaching its max speed. Another problem is that I don't know if it can get to max speed while climbing.
I looked at the case of the SR-71 and the XB-70 Valkyrie. These had more thrust than I wanted but that added weight because jet engines are so heavy. In any case I noted the climbing rate. From that it seemed doable, considering the high effective Isp, that you could reduce propellant mass that way. The problem is this is for a SSTO application and I can't afford the weight. What I wanted was the engines to put out in the range of 1/7th the vehicle weight to reduce the jet engine mass. What I don't know is how will that effect the climb rate, and will it even be able to reach supersonic now.
Note that an advantage of the SSTO is that you can get the better payload by flying a shallow angle and not have to worry about recovering the booster stage.Bob Clark
I discussed previously on NewMars the reasons why I think it should be possible to do a partially airbreathing SSTO with current jet engines in this post copied below from before the server crash.====================================================
...Looking at the numbers though I'm convinced now you can even make a single stage to orbit vehicle with a combined ramjet/rocket engine, and without having to use scramjets.
The idea is to combine the turbo-ramjet/rocket into a single engine. This is what Skylon wants to do with their Sabre engine. But the Sabre will use hypersonic airbreathing propulsion up to Mach 6.5 before the rockets take over. This will require complicated air-cooling methods using heat exchangers with flowing liquid hydrogen for the Skylon.However, just being able to get to say the Mach 3.2 reached by the SR-71 would take a significant amount off the delta-V required for orbit. Of course if the ramjet could get to Mach 5 that would be even better but key this would be doable with the existing engines of the SR-71. Note too the engines of the XB-70 Valkyrie bomber could operate at Mach 3 and as far as I know they didn't have ramjet operation mode. So it might not even be necessary for the engines to have a ramjet mode, turbojet might be sufficient.
The problem with using jets for the early part of the flight of an SSTO has been they are so heavy for the thrust they produce, generally in the T/W range of around 5 to 10. While rocket engines might have a T/W ratio in the range of 50 to 100. But a key point is the jet engine will be operating during the aerodynamic lift portion of the flight where the L/D ratio of perhaps 7. The XB-70 for instance had a L/D of about 7 during cruise at Mach 3. So if we take the T/W of the jet engine to be say 7 and the L/D to be 7, then the thrust to lift-off weight ratio might be about 50 to 1 comparable to that of rockets.
BTW, it is surprising there has been so little research on this type of combination with the jet and rocket combined into one. You hear alot about turbine-based-combined-cycle (TBCC) where it combines turbo- and scram-jets and rocket-based-combined-cycle (RBCC) , where the exhaust from a rocket is used to provide the compression for a ramjet. But not this type of combined turbojet/rocket engine. It doesn't seem to have an accepted name for example. It would not seem to be too complicated. You just use the same combustion chamber for rocket as for the jet. Probably also you would want to close off the inlets when you switch to rocket mode.
For the calculation the delta-V and propellant load would be feasible, note that for a dense propellant SSTO might require as much as 300 m/s lower delta-V than a hydrogen fueled SSTO, in the range of about 8,900 m/s, so I'll use kerosene as the fuel. Hydrogen might have an advantage though in being light-weight if what you wanted was horizontal launch. Say you were able to get to Mach 3+ with the jets, 1,000 m/s. The delta-V to supplied by the rocket-mode is then 7,900 m/s. But note also you can get to high altitude say to 25,000 m. This might subtract another 300 m/s from the required rocket-mode delta-V, so now to 7,600 m/s.
A bigger advantage than this of the altitude is the fact that you get the full vacuum Isp during rocket-mode, call it an exhaust velocity of 3,600 m/s for kerosene rockets. Note this results in a mass-ratio for the rocket mode portion of e^(7,600/3,600) = 8.3, less than half that usually cited for a kerosene-fueled all rocket SSTO. Note the fuel required for the jet-powered portion would only be a fraction of the dry mass rather than multiples of it based on the fact the 1,000 m/s jet-powered speed is only a fraction of the 10,000 m/s or so effective exhaust speed of jet engines.
Note this brings the kerosene fuel load to be about that of hydrogen fueled SSTO's, except you still have the high density of kerosene. With modern lightweight materials this should be well doable.
Bob Clark
=======================================================
Void:
Midoshi pointed out to me some time ago that atmospheric pressure is not the same as vapor pressure, in terms of the phase diagram for water. And he was right, too.
What keeps ice from sublimating at 0 deg C is an applied (partial) pressure of water vapor of 6 millibars. Dry mostly-CO2 will not serve that purpose: the exposed ice just sublimates, and also any liquid water phase just boils away. That's what Mars has right now.
It might be possible with minimal terraforming to achieve an atmospheric pressure in the Hellas Basin of 23 mbar, but, how much of that pressure is water vapor partial pressure? I dunno, but, until you have 6 mbar of water vapor partial pressure in Mars's atmosphere at 0C liquid temperature, liquid water and ice are simply not stable. Period.
That being said, I really am a fan of trying to terraform Mars. But, I am sure it will take a lot more than 23 mbar in Hellas Basin to accomplish that end.
How about 2 psia (0.14 atm, 140+ mbar) total atmospheric pressure? If nearly-pure oxygen, that would be good enough for humans to breathe without a pressure suit, but would still require an "oxygen mask" (really a pressure-breathing rig). Assuming it was not destroyed during terraforming, 6 mbar of that (about 4%) would be the original CO2 atmosphere. But, at 1% (just a wild guess) absolute (not relative!!!!!!) humidity, that would still be a water vapor pressure too low at 1.4 mbar to stop exposed ice sublimation, and exposed water boiling away.
Any terraformed Mars will require a still-denser atmosphere to ensure stable ponds and lakes, even if ice-covered. Maybe 4 times the 2 psia oxygen I proposed just above.
That's about the limit of what I know. Maybe some others could shed better light on this.
GW